Residential Energy Efficiency Assessment

Job & Client Details

Job Address(Required)

Street Address Suburb State Postcode

Contact Full Name(Required)

Client Project Reference

Contact Phone(Required)

Contact Email(Required)

Project Details(Required)

New Dwelling

Additions / Alterations to Existing Dwelling

Established Dwelling (Retrospective)

Other

Construction Details

Roof Type

Tiled

Metal

EPS Panel

Other

Roof Colour

Light

Medium

Dark

Other

Wall Construction

Timber Frame

Steel Frame

Cavity Brick

Brick Veneer

Reverse Brick Veneer

Masterwall / EPS Panel & Stud

Metal Clad

FC Clad

Other

Wall Colour

Light

Medium

Dark

Other

Floor Coverings

Please note, where floor coverings are not nominated for areas, the worst case scenario must be applied in the energy modelling and will be shown in your NatHERS Certificate.

Insulation Details

Additional insulation may be required to achieve compliance, our assessors will provide you with this if needed as well as the required R Value but please select all which apply to your design.

Ceiling

Bulk Insulation

Insulation Beads

Insulation Boards

Other

Roof

Non Reflective Foil

Reflective Foil

Anticon or Similar

EPS Roof Panels

Other

Walls

Insulation Batts

Insulation Beads (cavity fill)

Insulation Boards

Non Reflective Foil

Reflective Foil

Permicav or similar

Other

Suspended Floor

Bulk Insulation

Insulation Boards

Other

Slab on Ground

Insulation Boards

Slab Edge Insulation

Under slab insulation

Other

Windows and Doors

Default glazing figures from the FR5 Software will be used unless a WERS code is provided for the glazing that will be used, refer to the WERS website for a list of their approved windows.

Window Supplier / Manufacturer

WERS Codes

Window Frame Material

Aluminium

Thermally Broken Aluminium

Timber

PVC

Other

Window Frame Colour

Light

Medium

Dark

Other

Door Frame Material

Aluminium

Thermally Broken Aluminium

Timber

PVC

Other

Glazing Type

Single Clear Glazing

Single Tinted Glazing

Low e Glazing

Double Glazing Standard

Low e Double Glazing

Argon Filled Double Glazing

Comfort Plus

Sunergy

Other

Existing Frame Type

Not applicable for new dwellings

Aluminium

Thermally Broken Aluminium

Timber

PVC

Other

Existing Glazing Type

Not applicable for new dwellings

Single Clear Glazing

Single Tinted Glazing

Low e Glazing

Double Glazing Standard

Low e Double Glazing

Argon Filled Double Glazing

Comfort Plus

Sunergy

Other

Skylights / Solar Tubes

Quantity

Skylights / Solar Tubes Type

Single Clear Glazing

Tinted Glazing

Double Glazed Clear

Double Glazed Tinted

Velux Standard Double Glazed

Velux Argon Filled Double Glazed

Other

Skylights / Solar Tubes Openability

Fixed

Openable

Skylights / Solar Tubes Shaft

Insulated

Uninsulated

Unknown

External Shading

Select all which apply

Solid Roof Patio

Translucent Roof Patio

Pergola

External box awning around window

Roller Shutters

Fixed Awning

Lighting & Services

Type of Downlights

Standard Downlight – 150mm x 150mm fitting with 50mm clearance to surrounding ceiling insulation
IC Rated – Ceiling can be abutting the downlight fixture but not placed over the top
IC4/ICF Rated – Insulation can be laid all around the fitting and over the top so there is no reduction to ceiling insulation
Where the downlight information is unknown, worst-case scenario will be used which is Standard (unsealed)

Standard (sealed)

Standard (unsealed)

IC Rated (sealed)

IC Rated (unsealed)

IC4/ICF Rated (sealed)

IC4/ICF Rated (unsealed)

Unknown

None / Not Applicable

Size of Ceiling Fans

900mm

1200mm

1400mm

None / Not Applicable

Exhaust Fans

Sealed

Unsealed

None / Not Applicable

Size of Flumed Rangehood

90x90mm

120x120mm

150x150mm

200x200mm

None /Not Applicable

Drawing Requirements

Please ensure the required information and/or plans are provided.
Where information and/or plans are missing from the submission the job cannot be commenced and a request for the additional information will be sent prior to scheduling in the project.

Drawing Requirements Checklist(Required)

If you have previously sent us documents, please check below the documents that have been submitted:

Site Plan with North point arrow

Floor Plan(s)

Elevations

Section Drawings

Construction Material Details

Electrical / Lighting Plan

Window / Door Schedule

Existing House Plans with Window Sizes, Frame Material & Openability (applicable for additions / alterations only)

Please upload any further documentation below:

Drop files here or

Max. file size: 100 MB.

Comments

This field is for validation purposes and should be left unchanged.

Residential Energy Efficiency Assessment

Job Request Form

Job & Client Details

Construction Details

Insulation Details

Windows and Doors

Lighting & Services

Drawing Requirements

Get in Touch

Contact

Quick Links

FOLLOW Us